Central control of mobile services
Mobility Communication System
For example, you can use your audio system to make live announcements.
Make scheduled announcements or play live or triggered announcements during an emergency.
It is possible to engage in both single vehicles and all vehicles simultaneously.
Intercom System with emergency button
It is possible to make an emergency call from the vehicle. It is possible to issue emergency calls from several vehicles, which are processed sequentially at the operating stations of the operator.
Of course, the system offers a fully automatic self-test.
The images can be viewed back up to 48 hours. After 48 hours, the oldest images are automatically removed.
Of course, the cameras are also used in the station, in circulation or stops.
Use the RGB light control to show your passengers how long it takes to drive. For example: red indicates the departure, changes to yellow at the middle station and before the journey is over, the color changes to green, to show that you can prepare for the exit.
Vehicle localization along the route works via RFID.
RFID (Radio Frequency Identification) uses radio waves to wirelessly transmit the identity of an object. As a result, cabins can be located and identified at any time.
For example, the operator can recognize where the vehicle with the emergency call is, make position-dependent announcements, transport light effects or advertising messages.
Take advantage of the possibilities to communicate your information interactively, in a personalized and playful way via touch screen or mobile applications.
Infotainment and advertising messages at the right time – even for the desired audience – dynamic and concise.
Depending on the project requirements, there are various possibilities to load the MCEUs of the vehicles during garaging (for example by means of sliding contacts) or in the course of the station entrance or to equip the vehicles with autonomous power supply.
For example, a combination of solar cells, charging electronics and temporary storage, tailored to the needs of the MCCU, ensures autonomous power supply for the vehicles.
Special functions (on / off) can be performed by the receiver unit. This can serve to switch the (distance) lighting on or off. It is possible, for example, that when the doors are opened, the lighting is automatically switched on.